KEY INFORMATION
- Key Specifications: SUPER DOT 4, DOT 4, ISO 4925.
- Excellent braking response due to high boiling point of fluid.
- High wet boiling point ensures long term retention of fluid performance.
- Better performance for life of fluid compared to DOT 3 fluids
SUPER DOT 4 BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications
APPLICATION
SUPER DOT 4 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3, DOT 4 or Super DOT 4 brake & clutch hydraulic fluid.
SUPER DOT 4 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid.
SUPER DOT 4 BRAKE FLUID should be changed according to the manufacturers service specifications.
SUPER DOT 4 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid SUPER DOT 4 prior to first fill or before refilling the system.
PLEASE NOTE
- Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
- For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
- Not mixable with Silicone type assembly compounds
- Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.
CAUTION
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.
關鍵信息
- 主要規格：SUPER DOT 4、DOT 4、ISO 4925。
- 流體的高沸點，出色的製動響應。
- 高濕沸點可確保長期保持流體性能。
- 與 DOT 3 流體相比，流體壽命性能更好
SUPER DOT 4 制動液是一種優質、非有機矽、非礦物/石油基全合成製動液，設計用於各種制動和離合器應用
應用
SUPER DOT 4 制動液推薦用於需要非石油基 DOT 3 的乘用車、四輪驅動車、摩托車、輕型和重型商用車、採礦、建築和農業設備的製動和離合器系統的重新填充或加註， DOT 4 或 Super DOT 4 制動和離合器液壓油。
SUPER DOT 4 制動液適用於車輛製造商指定 DOT 3 或 DOT 4 制動液的情況。
SUPER DOT 4 制動液應根據製造商的服務規范進行更換。
SUPER DOT 4 BRAKE FLUID 可用於首次填充或重新填充制動或離合器系統。為獲得最佳效果，在首次加註或重新加註系統之前，應始終使用 Penrite 制動液 SUPER DOT 4 沖洗系統。
請注意
請勿將本產品與 SILICONE DOT 5 或礦物類製動液混合。
對於需要礦物產品的車輛，例如雪鐵龍，應使用 Penrite LHM Plus。
不可與有機矽類組裝化合物混合
避免接觸皮膚、清漆和油漆。如果發生皮膚接觸，請用水清洗。
警告
制動液具有天然吸濕性，會從空氣中吸收水分。這會降低產品的有效性。開瓶後，確保瓶蓋重新蓋緊，以免水污染。