KEY INFORMATION
- Base Oil: Full Synthetic
- Viscosity: SAE 0W-30
- For Petrol / E10, Diesel, LPG, Hybrid vehicles
- Key Specifications: ACEA A5/B5, API SL
HPR 0 is a premium, full synthetic SAE 0W-30 engine oil. It features a DOUBLE LAYER of engine wear protection and Penrite's advanced EXTRA TEN technology. It uses a combination of advanced additive technology and a low shear rate viscosity modifier, to ensure additional protection against wear, corrosion, oxidation, piston deposits and sludge under tough conditions.
It meets API SL and ACEA A5/B5 as well as other specifications.
APPLICATION
HPR 0 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines, including petrol/electric hybrids. It is not suitable for use in Rotary engines.
HPR 0 is recommended for use in vehicles where SAE 0W-20, 5W-20 or 0W-30 low viscosity engine oils were originally recommended by the manufacturer. It can be used where the ILSAC GF-3/GF-4/GF-5, ACEA A1/B1 (obsolete) and ACEA A5/B5 fuel economy specifications are requested by the manufacturer. It is also suitable for use in many Diesel and LPG powered vehicles requiring an engine oil meeting ACEA B5 specifications.
HPR 0 is suitable in petrol/electric powered hybrids where this viscosity and specification are requested by the manufacturer. It is NOT recommended for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-Mid SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil.
VEHICLE AND FUEL TYPES
HPR 0 is suitable for use in passenger cars, 4WD's & light commercial vehicles and is compatible with Unleaded Petrol/LPG (Dual Fuel)/E10 & Diesel and other conventional fuels. It is not suitable for use in four stroke motorcycles.
EXTRA-TEN TECHNOLOGY
HPR 0 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
IMPORTANT INFORMATION WHEN CHANGING OIL.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
關鍵信息
- 基礎油：全合成
- 粘度：SAE 0W-30
- 適用於汽油/E10、柴油、液化石油氣、混合動力汽車
- 主要規格：ACEA A5/B5、API SL
它符合 API SL 和 ACEA A5/B5 以及其他規範。
應用
HPR 0 設計用於現代 4、6 和 8+ 缸多凸輪、多氣門（包括 VVT）、自然吸氣、機械增壓和渦輪增壓發動機，包括汽油/電動混合動力。它不適合在旋轉發動機中使用。
HPR 0 推薦用於製造商最初推薦使用 SAE 0W-20、5W-20 或 0W-30 低粘度發動機油的車輛。它可用於製造商要求 ILSAC GF-3/GF-4/GF-5、ACEA A1/B1（過時）和 ACEA A5/B5 燃油經濟性規格的地方。它也適用於許多需要符合 ACEA B5 規格的發動機油的柴油和 LPG 動力車輛。HPR 0 適用於製造商要求此粘度和規格的汽油/電動混合動力車。不建議將其用於配備 DPF（柴油微粒過濾器）且需要 ACEA“C”級中低 SAPS（硫酸灰、磷和硫）發動機油的柴油機。
車輛和燃料類型
HPR 0 適用於乘用車、四輪驅動和輕型商用車，並與無鉛汽油/LPG（雙燃料）/E10 和柴油以及其他常規燃料兼容。它不適合在四衝程摩托車上使用。
十項科技
HPR 0 在機油的 SAE 評級中具有 Penrite EXTRA 10。該技術通過使用具有較高工作溫度粘度的油的正常啟動粘度來幫助保護您的發動機。這提高了發動機油膜強度，降低了摩擦熱，同時為標準 SAE 級油提供了額外的抗磨損保護層，減少了所有駕駛條件下的發動機磨損。
換油時的重要信息
注意：更換機油時，Penrite 建議使用 Penrite Engine Flush，這是一種快速起效、無溶劑的發動機清潔配方，可通過機油排放管去除發動機沉積物、油泥和污染物。它含有用於發動機磨損保護的添加鋅，其快速作用配方可在 10 分鐘內發揮作用。