KEY INFORMATION
- Key Specifications: DOT 5.1, ISO 4925 Class 5.1, FMVSS 116 DOT 5.1 NON SILICONE BASE
- Suitable where DOT 5.1 fluids are required and for ESP and AEB braking systems.
- Low viscosity (at -40ºC), suitable for faster fluid circulation in micro-valves of ABS systems
- High boiling point 275ºC / 525ºF
DOT 5.1 Brake Fluid is a premium quality, full synthetic, non-silicone, DOT 5.1 brake fluid designed for use in a wide range of brake and clutch applications. It can also be used in vehicles with ABS (Anti Brake Skid), AEB (Auto Emergency Braking) and ESP (Electronic Stability Program) systems where Penrite Brake Fluid DOT 4 ESP was previously used.
APPLICATION
DOT 5.1 Brake Fluid is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD’s, motorcycles, light and heavy-duty commercial vehicles, mining, construction, agricultural and all other moving vehicle types that require a non-petroleum based brake & clutch hydraulic fluid.
DOT 5.1 Brake Fluid is suitable for use where either DOT 3, DOT 4, Super DOT 4 or DOT 5.1 fluids are specified. It is also suitable for use with all types of seals, hoses and other brake and clutch system parts. It is suitable for use where lower viscosity fluids (at -40ºC) are required in colder climatic conditions in the latest ESP, ABS and AEB braking systems with micro valves, that require a lower viscosity and faster circulating fluid to perform correctly.
DOT 5.1 Brake Fluid can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid DOT 5.1 fluid prior to first fill or before refilling the system. It should be replaced in accordance with the vehicle manufacturer’s specifications.
PLEASE NOTE:
- DO NOT mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
- For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
- Silicone type assembly compounds should not be used in conjunction with this product.
- Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.
Caution: Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.
關鍵信息
- 主要規格：DOT 5.1、ISO 4925 Class 5.1、FMVSS 116 DOT 5.1 非矽膠基
- 適用於需要 DOT 5.1 油液的場合以及 ESP 和 AEB 制動系統。
- 低粘度（-40ºC），適用於 ABS 系統的微型閥中更快的流體循環
- 高沸點 275ºC / 525ºF
DOT 5.1 制動液是一種優質、全合成、非有機矽的 DOT 5.1 制動液，設計用於各種制動和離合器應用。它也可用於之前使用 Penrite 制動液 DOT 4 ESP 的具有 ABS（防滑）、AEB（自動緊急制動）和 ESP（電子穩定程序）系統的車輛。
應用
DOT 5.1 制動液推薦用於乘用車、四輪驅動車、摩托車、輕型和重型商用車、採礦、建築、農業和所有其他需要非- 基於石油的製動和離合器液壓油。
DOT 5.1 制動液適用於指定 DOT 3、DOT 4、Super DOT 4 或 DOT 5.1 液的場合。它也適用於所有類型的密封件、軟管和其他制動和離合器系統部件。它適用於在較冷氣候條件下需要較低粘度流體（-40ºC）的情況下，在最新的帶微閥的 ESP、ABS 和 AEB 制動系統中，需要較低粘度和更快的循環流體才能正確執行。
DOT 5.1 制動液可用於首次填充或重新填充制動或離合器系統。為獲得最佳效果，在首次加註或重新加註系統之前，應始終用 Penrite 制動液 DOT 5.1 流體沖洗系統。應根據車輛製造商的規格進行更換。
請注意：
請勿將本產品與 SILICONE DOT 5 或礦物型製動液混合。
對於需要礦物產品的車輛，例如雪鐵龍，應使用 Penrite LHM Plus。
矽酮類組裝化合物不應與本產品一起使用。
避免接觸皮膚、清漆和油漆。如果發生皮膚接觸，請用水清洗。
注意：制動液具有天然吸濕性，會從空氣中吸收水分。這會降低產品的有效性。開瓶後，確保瓶蓋重新蓋緊，以免水污染。