KEY INFORMATION
- Contains zinc for added wear protection
- Fast acting, cleans in 10 minutes
- Solvent free to prevent engine seal damage
Engine Flush is a solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process.
APPLICATION
Engine Flush is designed for use in all engine types in passenger cars, 4WD's, light & heavy duty commercial vehicles, motorcycles, farming, mining, agricultural, industrial equipment, marine and stationary engines.
Engine Flush is safe to use in all petrol, LPG & diesel engines and is safe for catalytic converters, DPF's (Diesel Particulate Filters) and engine sensors. Its unique formulation of cleaning agents are designed to clean oil galleries, oil sludge and engine contaminants that effect lubrication of the engine. These contaminants are broken down by the Engine Flush and drained away with the oil service.
Engine Flush is economical to use with an application rate is 50 ml Engine Flush per litre of oil. A 375ml bottle of Engine Flush will treat 7.5 litres of oil. Engine Flush is recommended for use at every oil service to maintain engine cleanliness.
FOR BEST RESULTS
- Start engine and run for 5 minutes
- Application rate is 50ml per litre of oil. E.g. 375ml treats 7.5lts of oil
- Add Engine Flush to engine oil prior to oil change through the oil fill point.
- Re-start engine, let the engine run for 10 minutes
- Allow engine to cool then drain engine oil & replace oil filter
- Refill engine oil using the appropriate Penrite oil
- Dispose of used oil & filter responsibly
Note: Penrite recommend using Engine Flush at each oil change as preventative maintenance against sludge formation and to maximise the life of new engine oil.
關鍵信息
- 含有鋅以增加磨損保護
- 起效快，10分鍾清潔
- 無溶劑以防止發動機密封損壞
Engine Flush 是一種不含溶劑的發動機清潔配方，可通過排油管去除發動機沉積物、油泥和污染物。它含有用於發動機磨損保護的添加鋅，其快速作用配方可在 10 分鐘內發揮作用。無溶劑配方可保護墊圈和密封件在清潔過程中免受損壞。
應用
Engine Flush 設計用於乘用車、四輪驅動、輕型和重型商用車、摩托車、農業、採礦、農業、工業設備、船舶和固定發動機中的所有發動機類型。
Engine Flush 可安全用於所有汽油、LPG 和柴油發動機，對催化轉化器、DPF（柴油微粒過濾器）和發動機傳感器也是安全的。其獨特的清潔劑配方旨在清潔影響發動機潤滑的油道、油泥和發動機污染物。這些污染物被發動機沖洗液分解，並隨著機油服務排出。
使用發動機沖洗液是經濟的，施用率為每升油 50 毫升發動機沖洗液。一瓶 375 毫升的發動機沖洗液可處理 7.5 昇機油。建議在每次機油保養時使用發動機沖洗液，以保持發動機清潔。
發揮最佳的效能
- 啟動發動機並運行 5 分鐘
- 施用率為每升油 50 毫升。例如。 375ml 可處理 7.5 升油
- 在通過機油加註點更換機油之前，將發動機沖洗液添加到發動機機油中。
- 重新啟動發動機，讓發動機運轉10分鐘
- 讓發動機冷卻，然後排放發動機機油並更換機油濾清器
- 使用合適的 Penrite 機油加註發動機機油
注意：Penrite 建議在每次換油時使用發動機沖洗液作為預防性維護，以防止油泥形成並最大限度地延長新發動機油的使用壽命。