KEY INFORMATION
- Base Oil: Full Synthetic
- Viscosity: SAE 10W-40
- For Petrol / E10, Diesel, LPG vehicles
- Key Specifications: ACEA E6, ACEA E9, API CK-4.
Enviro+ 10W-40 is a highly advanced, full synthetic OEM & Industry Approved, extended drain/mixed fleet, ultra high performance diesel (UHPD) oil. It is formulated with the highest standard synthetic base oil and advanced additives to ensure protection against wear, corrosion, oil oxidation and sludge.
Enviro Plus 10W-40 is Licensed by the API (American Petroleum Institute) to meet CK-4 specifications ensuring quality and satisfaction. It is OEM Approved for Mercedes Benz 228.52 specifications.
APPLICATION
Enviro+ 10W-40 is primarily designed for use in modern 4, 6 & 8 cylinder naturally aspirated and turbocharged four-stroke, low emission, light and heavy duty diesel engines including those fitted with/without Diesel Particulate Filters (DPFs).
It may be used where SAE 10W-40 or SAE 15W-40 grade oils are specified by the manufacturer. It can be used where ACEA E9, JASO DH-2 and API CK-4 or where previous API specifications CJ-4, CI-4/Plus, CI-4 or CH-4 are recommended. It is also suitable for use in engines requiring high performance ACEA E4/E6 oils. Suitable for use in the latest Euro IV and Euro V emissions European diesel engines including those that use SCR (Selective Catalytic Reduction) emissions systems along with those fitted with or without DPFs (Diesel Particulate Filters). Also suitable for use in normal or cooled EGR (Exhaust Gas Recirculation) systems, and 2001-on emissions engines where API CI-4 or higher oils are required.
It is approved for use in Mercedes Benz light commercial and passenger car diesel engines where MB 228.52 is required and can be used where MB 228.31 or 228.51 are specified in the owners handbook. It is suitable for extended drain intervals with OEM operating conditions and can also be used in other light commercial and passenger vehicles if a full synthetic diesel engine oil is required or specified by the manufacturer.
VEHICLES AND FUEL TYPES
Suitable for passenger car, 4WDs, light & heavy duty commercial vehicles, construction, mining and agricultural equipment. It can be used in both light and heavy duty diesel fuelled vehicles. It is NOT recommended for use in motorcycles.
IMPORTANT MAINTENANCE INFORMATION
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
關鍵信息
- 基礎油：全合成
- 粘度：SAE 10W-40
- 適用於汽油/E10、柴油、液化石油氣車輛
- 主要規格：ACEA E6、ACEA E9、API CK-4
Enviro+ 10W-40 是一種高度先進的全合成 OEM 和行業認可的延長排放/混合車隊、超高性能柴油 (UHPD) 油。 它採用最高標準的合成基礎油和高級添加劑配製而成，可確保防止磨損、腐蝕、油氧化和油泥。
Enviro Plus 10W-40 已獲得 API（美國石油協會）的許可，符合 CK-4 規範，確保質量和滿意度。 它是 OEM 批准的Mercedes Benz 228.52 規格。
應用
Enviro+ 10W-40 主要設計用於現代 4、6 和 8 缸自然吸氣和渦輪增壓四衝程、低排放、輕型和重型柴油發動機，包括配備/不配備柴油微粒過濾器 (DPF) 的柴油發動機。
它可用於製造商指定 SAE 10W-40 或 SAE 15W-40 級油的地方。它可用於 ACEA E9、JASO DH-2 和 API CK-4 或推薦以前的 API 規範 CJ-4、CI-4/Plus、CI-4 或 CH-4 的地方。它也適用於需要高性能 ACEA E4/E6 機油的發動機。適用於最新的歐 IV 和歐 V 排放歐洲柴油發動機，包括使用 SCR（選擇性催化還原）排放系統的發動機以及配備或不配備 DPF（柴油微粒過濾器）的發動機。也適用於需要 API CI-4 或更高級別機油的正常或冷卻 EGR（廢氣再循環）系統和 2001 年排放發動機。
它被批准用於需要 MB 228.52 的奔馳輕型商用車和乘用車柴油發動機，並且可以在車主手冊中指定 MB 228.31 或 228.51 的情況下使用。它適用於在 OEM 運行條件下延長換油週期，如果製造商需要或指定全合成柴油發動機油，它也可用於其他輕型商用車和乘用車。
車輛和燃料類型
適用於乘用車、四驅車、輕型和重型商用車、建築、採礦和農業設備。它可用於輕型和重型柴油燃料車輛。不建議在摩托車上使用。
重要信息
注意：更換機油時，Penrite 建議使用 Penrite Engine Flush，這是一種快速起效、無溶劑的發動機清潔配方，可通過機油排放管去除發動機沉積物、油泥和污染物。它含有用於發動機磨損保護的添加鋅，其快速作用配方可在 10 分鐘內發揮作用。
對於配備柴油微粒過濾器的車輛，我們建議使用 Penrite ENVIRO+DPF 清潔劑來清潔和防止 DPF 堵塞，最大限度地延長催化劑壽命並提高發動機效率、動力和燃油經濟性。