KEY INFORMATION
- Base Oil: Full Synthetic
- Viscosity: SAE 5W-30
- For Petrol / E10, Diesel, LPG vehicles
- Key Specifications: ACEA C4, ACEA C3.
ENVIRO+ C4 is a premium full synthetic, SAE 5W-30 engine oil. It is manufactured using advanced low SAPS (Sulphated ash, Phosphorus and Sulphur)* additive technology.
APPLICATION
ENVIRO+ C4 is designed for use in modern 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged diesel & petrol low emission engines including those fitted with/without DPFs (Diesel Particulate Filters).
ENVIRO+ C4 may be used where SAE 0W-30, SAE 5W-30 and SAE 10W-30 grade oils are specified by the manufacturer. It can be used where either ACEA C4 or ACEA C3 engine oils are specified and is also suitable for use where ACEA C1 oils are recommended where it may provide a higher level of wear protection.
ENVIRO+ C4 is recommended for Nissan Navara YD25 D40 4 Cylinder 2.5 Litre from 2011 onwards and D40 V9X V6 3.0 Litre turbo diesel engines from 2010 onwards that are fitted with a Diesel Particulate Filter (DPF). It is also recommended for Nissan X Trail M9R 2.0 Litre Turbo Diesel from 2011 onwards and Pathfinder R51 3.0 Litre V6 Turbo Diesel from 2011 onwards**. It is also suitable for use in selected Renault, Nissan, Jaguar, Hyundai, Mercedes-Benz, Land Rover, Range Rover, Suzuki and many other light duty diesel vehicles.
VEHICLE AND FUEL TYPES
ENVIRO+ C-4 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It is not recommended for use in motorcycles. It can be used in light duty diesel engines with / without a DPF (Diesel Particulate Filter), Petrol, LPG (Dual Fuel & LPi Liquid Phase Injection) and E10 fuelled engines.
IMPORTANT MAINTENANCE INFORMATION
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
** Please check the Penrite Lube Guide for the correct product application per vehicle. Some vehicles NOT fitted with Diesel Particulate Filter may require an alternative Penrite engine oil.
關鍵信息
- 基礎油：全合成
- 粘度：SAE 5W-30
- 適用於汽油/E10、柴油、液化石油氣車輛
- 主要規格：ACEA C4、ACEA C3。
ENVIRO+ C4 是一種優質全合成 SAE 5W-30 發動機油。它採用先進的低 SAPS（硫酸灰、磷和硫）*添加劑技術製造。
應用
ENVIRO+ C4 設計用於現代 4、6 和 8+ 缸、多凸輪、多氣門（包括 VVT）、自然吸氣、機械增壓和渦輪增壓柴油和汽油低排放發動機，包括配備/不配備 DPF（柴油微粒過濾器）。
ENVIRO+ C4 可用於製造商指定 SAE 0W-30、SAE 5W-30 和 SAE 10W-30 級油的地方。它可用於指定使用 ACEA C4 或 ACEA C3 發動機油的地方，也適用於推薦使用 ACEA C1 機油的地方，因為它可以提供更高水平的磨損保護。
ENVIRO+ C4 推薦用於 2011 年以後的日產 Navara YD25 D40 4 缸 2.5 升發動機和 2010 年以後配備柴油微粒過濾器 (DPF) 的 D40 V9X V6 3.0 升渦輪柴油發動機。還建議從 2011 年起用於 Nissan X Trail M9R 2.0 升渦輪增壓柴油發動機和從 2011 年起用於 Pathfinder R51 3.0 升 V6 渦輪增壓柴油發動機**。它也適用於選定的Renault, Nissan, Jaguar, Hyundai, Mercedes-Benz, Land Rover, Range Rover, Suzuki 和許多其他輕型柴油車。
車輛和燃料類型
ENVIRO+ C-4 適用於乘用車、四驅車和輕型商用車。不建議在摩托車上使用。它可用於帶/不帶 DPF（柴油微粒過濾器）的輕型柴油發動機、汽油、LPG（雙燃料和 LPi 液相噴射）和 E10 燃料發動機。重要維護信息
對於配備柴油微粒過濾器的車輛，我們建議使用 Penrite ENVIRO+DPF 清潔劑來清潔和防止 DPF 堵塞，最大限度地延長催化劑壽命並提高發動機效率、動力和燃油經濟性。注意：更換機油時，Penrite 建議使用 Penrite Engine Flush，這是一種快速起效、無溶劑的發動機清潔配方，可通過機油排放管去除發動機沉積物、油泥和污染物。它含有用於發動機磨損保護的添加鋅，其快速作用配方可在 10 分鐘內發揮作用。
* 低 SAPS 油有時可能被稱為“低灰分”油
** 請查看 Penrite 潤滑油指南，了解每輛車的正確產品應用。一些未配備柴油微粒過濾器的車輛可能需要替代 Penrite 發動機油。