KEY INFORMATION
- Base Oil: Full Synthetic
- Viscosity: SAE 5W-30
- For Petrol / E10, Diesel, LPG vehicles
- Key Specifications: ACEA C3, VW 504 00 / 507 00
ENVIRO+ 5W-30 is a premium full synthetic, SAE 5W-30 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved engine oil. It is fully approved for warranty service for VAG (Volkswagen Automotive Group) vehicles such as Volkswagen / Audi / Skoda / Seat engines using the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.
Enviro+ 5W-30 is VW 504 00/507 00 APPROVED and exceeds ACEA C3 specifications.
APPLICATION
ENVIRO+ 5W-30 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is suitable for use in direct injection (FSI/TSI) petrol and light duty diesel (TDI) engines including those fitted with/without DPFs (Diesel Particulate Filters).
ENVIRO+ 5W-30 may be used where SAE 0W-30, 5W-30 and 10W-30 grade oils are specified by the manufacturer. It can be used where ACEA C3 oils are specified by the manufacturer. It can also be used for vehicle models prior to 2008 model year where fuel economy specifications ACEA A1/B1 (Obsolete) and ACEA A5/B5 are required or where ACEA A3/B4 was specified. It may also be used where ACEA C2 is required.
ENVIRO+ 5W-30 is suitable for warranty service in Audi, Volkswagen and Skoda vehicles where VW 504 00 / 507 00 specifications are required. It is also suitable for use where MB 229.31/229.51, BMW Longlife-04, Porsche C30, Chrysler MS-11106 oils are required in vehicles such as Mercedes Benz, BMW, Porsche, Chrysler/Jeep & SsangYong as well as other vehicles requiring these specifications.
VEHICLE & FUEL TYPES
ENVIRO+ 5W-30 is suitable for use in passenger cars, 4WDs & light commercial vehicles and can be used with Petrol, LPG, E10, diesel (With & Without DPFs) & other conventional fuels. It is not recommended for use in motorcycles.
IMPORTANT MAINTENANCE INFORMATION
For vehicles fitted with a Diesel Particulate Filter, we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
關鍵信息
- 基礎油：全合成
- 粘度：SAE 5W-30
- 適用於汽油/E10、柴油、液化石油氣車輛
- 主要規格：ACEA C3、大眾 504 00 / 507 00
Enviro+ 5W-30 已通過 VW 504 00/507 00 認證並超過 ACEA C3 規格。
應用
ENVIRO+ 5W-30 設計用於現代 4、6 和 8+ 缸多凸輪、多氣門（包括 VVT）、自然吸氣、機械增壓和渦輪增壓發動機。它適用於直噴 (FSI/TSI) 汽油和輕型柴油 (TDI) 發動機，包括配備/不配備 DPF（柴油微粒過濾器）的發動機。
ENVIRO+ 5W-30 可用於製造商指定 SAE 0W-30、5W-30 和 10W-30 級油的地方。它可用於製造商指定 ACEA C3 油的地方。它也可用於 2008 車型年之前需要燃油經濟性規格 ACEA A1/B1（過時）和 ACEA A5/B5 或指定 ACEA A3/B4 的車型。它也可用於需要 ACEA C2 的地方。
ENVIRO+ 5W-30 適用於需要 VW 504 00 / 507 00 規格的Audi, Volkswagen and Skoda的保修服務。它也適用於需要 MB 229.31/229.51、BMW Longlife-04、Porsche C30、Chrysler MS-11106 機油的車輛，例如Mercedes Benz, BMW, Porsche, Chrysler/Jeep & SsangYong以及其他需要這些機油的車輛規格。車輛和燃料類型
ENVIRO+ 5W-30 適用於乘用車、四驅車和輕型商用車，可與汽油、液化石油氣、E10、柴油（帶和不帶 DPF）和其他常規燃料一起使用。不建議在摩托車上使用。重要信息
對於配備柴油微粒過濾器的車輛，我們建議使用 Penrite ENVIRO+DPF 清潔劑來清潔和防止 DPF 堵塞，最大限度地延長催化劑壽命並提高發動機效率、動力和燃油經濟性。
注意：更換機油時，Penrite 建議使用 Penrite Engine Flush，這是一種快速起效、無溶劑的發動機清潔配方，可通過機油排放管去除發動機沉積物、油泥和污染物。它含有用於發動機磨損保護的添加鋅，其快速作用配方可在 10 分鐘內發揮作用。
* 低 SAPS 油有時可能被稱為“低灰分”油